ViewSonic N3246w - OSD Function; Analog OSD Functions; Video Adjustments

ViewSonic N3246w/N3746w
OSD Function
Analog OSD Functions
To use the menus
1. Press the MENU button repeatedly to display each menu.
2. Use the cursor up/down to select a menu item or adjust the setting of Menu item.
3. Use the cursor left/right to enter a submenu or enable the function.
4. Press the MENU button to exit the menu.
MAIN MENU
Press the MENU button to display the Main menu. It offers the following options: Picture
adjustments, Audio adjustments, PIP/POP adjustments, TV channels search menu (only
in TV mode) and PC adjustments (only in PC mode). It also allows to define your
preferences in the Setup menu.
Video Adjustments
Display the Main menu by pressing MENU button.
Select the Video menu using the ¿ / À buttons.
Press the OK button to confirm.
Use the ¿ / À buttons to select each option.
Preset: choose Personal, Vivid, Standard or Mild.
Personal gives access to following adjustments.
Contrast, Brightness, Colour and Sharpness: adjust these settings as required using
the ½ / ¾ buttons.
Tint: This option is only available for NTSC audio-visual sources.
Adjust the tint of the picture using the ½ / ¾ buttons.
Noise Reduction: When the signal is poor, you can turn on the noise reduction function
Color Temp: Choose Standard, Warm or Cold.
Press the EXIT button to exit the Video menu.
Note: This menu is removed automatically after a few seconds without using the remote
control.
When you adjust a menu option (Contrast for
example), the menu is replaced by a sub-menu as
illustrated. Press the OK button to return to the Video
menu.
ENGLISH
18