ViewSonic N3246w/N3746w
Front View of the Product
Power : Press this button to turn on the TV or allow the TV to enter standby mode. It is
located on the top middle corner of the TV.
If the TV is in standby mode, the indicator at the front will illuminate amber.
Menu : Press this button to display or exit the OSD menu.
CH(▲
): When the OSD menu appears, press these two buttons to select the
item you want to execute; when no OSD menu appears, use to change
channels in TV mode.
Vol(+ -) : When the OSD menu appears, press these two buttons to confirm the selected
item; when no OSD menu appears, use to adjust the volume.
Source: Press this button to display selected source, press ▲
button to select.
ENGLISH
7
To Next Page
Loading...
Need help?
General
