ViewSonic N3246w - Options

ViewSonic N3246w/N3746w
Options
This menu allows to select the language for the menus as well as the colour of the screen
when there is no video input. It also allows to set an automatic shut-off time.
Display the Main menu by pressing MENU button.
Select the Options menu using the Àbutton.
Press the OK button to confirm
Use the ¿ / À buttons to select each option.
Menu language: To select the language for the menu. Total have English, German,
Italian, French, Spanish, Portuguese, Swedish, Finnish and Dutch.
Menu timeout: To set an automatic shut-off time for Menu. Using ½ / ¾ buttons select 5 >
10 > 20 > 30 > 40 > 50 seconds.
Menu background: Select Opaque or Transparent type.
Sleep Timer: To set an automatic shut-off time. Using ½ / ¾ buttons select Off > 15 > 30 >
45 > 60 > 90 > 120 minutes.
Once the time is ended, TV set automatically switch on standby mode.
If you turn the TV on standby mode after setting the sleep timer, setting will be erased. Set
it again.
Note: You can display the remaining time before the automatic shut-off. To do that, press
the sleep button.
To cancel the automatic shut-off, press several times the sleep button to display Sleep
timer Off.
Blue Screen: To have a blue screen when there is no video input.
Using the ½ / ¾ buttons select On.
Select Off if you do not want the blue screen.
Teletext language: Using ½ / ¾ buttons, select the character set that will be used for
Teletext on this channel.
The following character sets are available: West Europe, East Europe, Cyrillic (Russia),
Greek, Arabic, Persian.
The character set determines how characters are displayed on Teletext screen.
PC Timing: Select PC Timing to 1360x768 or 1280x768.
Reset: Reset to default, except the OSD language, video and audio adjustment by
personal.
Press the EXIT button to exit the Options menu.
Note: This menu is removed automatically after a few seconds without using the remote
control.
ENGLISH
21