ViewSonic N3246w - Digital OSD Functions; First-Time Installation; Channel List Management

ViewSonic N3246w/N3746w
Frequency: Allows to enter a specific frequency for tuning.
Using the À button, select the Frequency option and press the OK button.
Using the 0~9 digit and ½ / ¾ buttons, enter desire frequency and press the OK button.
Name: Allows to edit the channel name.
Using the À button, select the Name option.
Using the ¾ button select the first letter field.
By pressing the 0~9 digit repeatedly and using the following table select the first
character.
Repeat the procedure for each letter field.
BUTTON AVAILABLE CHARACTERS
1 1 Space — • !
2 2 a b c @
3 3 d e f #
4 4 g h i $
5 5 j k l %
6 6 m n o ^
7 7 p q r &
8 8 s t u v
9 9 w x y z
0 0 * # ( )
Store prog.: Allows to Save a channel on a new Program No. or to Insert a channel on
an already existing Program No. (The channel previously saved on this program No. will
be shifted to the uper program.).
Once a channel has been found and named, use the À button to select the Store prog.
option.
Using the ½ / ¾ buttons, select Save or Insert and press the OK button to confirm.
System: Allows to change the audio norm.
Using the À button, select the System option.
Using the ½ / ¾ buttons, select the norm.
The audio norm change will also change broadcasting system. Not suggest to change the
audio norm if you are not sure the audio system.
Skip: Allows to skip a channel.
Using the À button, select the Skip option.
Using the ½ / ¾ buttons, select On, the channel will be skip.
Repeat this procedure to skip other channels.
Fine tuning: If the picture is not clear, you can adjust the setting.
Using the À button, select the Fine Tuning option.
Use the ½ / ¾ buttons to find the good tuning point.
ENGLISH
23