ViewSonic NMP-302w - AppStart: Configuring Startup Content

12
2.7. Content conguration – AppStart
User can assign the URL and App after system start up.
1. Click on the Advanced button. The advanced conguration menu will be
launched. (Fig. 2.6.1)
2. Click on Content, and then click AppStart.
3. Enter the valid URL of HTML/SMIL in AppStart. (Fig. 2.7.1)
4. Auto run can be disabled from here. Auto run will automatically be
enabled when content is played.
In most cases, the network needs to be re-congured on site, so this
prevents the device from starting playback automatically when powered
up for the rst time on-site.
5. The Advanced option is used for the 3rd-party App congurations only.
(Fig. 2.7.1)