ViewSonic NMP-302w - Sound and Touch Input Settings

20
2.11. Sound settings
To control the output sound volumes and touch sounds:
1. Click on the Advanced button. The advanced conguration menu will be
launched. (Fig. 2.6.1)
2. Click on Display/sound, and then click on Sound. The Sound Settings
page will be launched.
(Fig. 2.11.1)
3. Click on Volumes, the Volumes settings page will be launched. Drag the
blue dots to adjust the volumes for the selected item, and then click OK
to save the new settings. (Fig. 2.11.3)
4. Click on the checkbox on the right to enable/disable Touch sounds.
(Fig. 2.11.2)
(Fig. 2.11.2)