ViewSonic Optiquest Q71 - Operation; Monitor Controls

9
Optiquest Q71
E
N
G
L
I
S
H
Operation
R5
U
2
This section shows how to adjust the Optiquest Q71 monitor using the buttons
and the OnView
®
control menu (pages 10-14). To adjust the monitor, follow
the instructions on page 10.
OPERATION
• Displays the OnView control menu (page 10).
• Selects icon that is highlighted on the menu.
• Deselects the highlighted icon.
Power
LED.
Power
Degausses
automatically
when turning
on the power.
• Recalls factory set adjustments
• Degausses monitor of possible magnetic buildup.
.
• Scrolls clockwise or counter-clockwise through
control menu icons.
• Increases or decreases the value of the selected icon.
○○○○○○○○○○○○
Brightness
• Exits the control menu when the button is
pressed twice.
• Displays an adustment screen when
control menu is off.
Contrast
• Exits the control menu when
the button is pressed twice.
• Displays an adustment screen
when control menu is off.
Adjust - and +
Select
➛
Recall
R5
U