ViewSonic PJ-vTouch-10S - User Manual

PJ-vTouch-10S
Projector Interactive Kits
User Guide
Model No. VS16519
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specic languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”

ViewSonic PJ-vTouch-10S Specifications

General

Brand	ViewSonic
Model	PJ-vTouch-10S
Category	Projector Accessories
Language	English

Summary

Setup Procedure

Mounting the Camera onto the Projector

Instructions for attaching the camera unit to the projector.

Connecting Projector to Computer

How to connect the projector to a computer using cables.

Connecting Computer and Camera

Connecting the computer to the camera unit via USB.

Laser Module Installation

Laser Module Adjustment

Red Laser Flatness Calibration

Operating Environment and Software Setup

Software Installation Procedure

General steps and requirements for installing the EyeRIS software.

Downloading the Software

How to Uninstall the Software

How to Uninstall the Software

Step-by-step guide for uninstalling the EyeRIS software.

Startup the Software

Launching the EyeRIS Application

Calibration Menu Display

Calibration Menu Interface

Explanation of status indicators and UI elements in the calibration menu.

Performing Manual Calibration

Initiating the manual calibration process.

Performing Calibration

Start Manual Calibration

Instructions for performing manual calibration.

Start Automatic Calibration

Instructions for performing automatic calibration.

Align Finger Touch Module

Calibrate and adjust the touch module using gears.

Automatic Calibration

Perform Calibration Automatically

Process of automatically calibrating the stylus pen position.

Automatic Calibration Troubleshooting

Manual Calibration

Perform Calibration Manually

Process of manually calibrating the stylus pen position.

Alignment Procedure

Aligning EyeRIS with Sensor Viewer

Using Sensor Viewer to precisely align the EyeRIS module.

Troubleshooting

Troubleshooting Tips

General tips and advice for resolving common issues.

Ambient Light Interference

Stylus Pen Not Working

Common issues and solutions when the stylus pen is not functioning.

Finger Touch Operation Failure

Troubleshooting steps for when the finger touch operation fails.

Inaccurate Tracing Issues

Solutions for inaccurate tracing when using the stylus pen.

Checking Installation Condition

Verifying the camera unit's installation and recognition area.

External Light Influence Check

Specifications

Camera Specifications

Laser Module Specifications

Stylus Pen Specifications

Limited Warranty

Warranty Coverage Details

Warranty Duration

Warranty Protection Scope

Warranty Exclusions

How to Obtain Service

Steps and requirements for obtaining warranty service.

Mexico Limited Warranty

Mexico Warranty Coverage

Mexico Warranty Duration

Mexico Warranty Scope

Mexico Warranty Exclusions

Mexico Service Acquisition

Steps and requirements for obtaining warranty service in Mexico.