EasyManua.ls Logo

ViewSonic PJ-vTouch-10S - Specifications; Camera Specifications; Laser Module Specifications; Stylus Pen Specifications

ViewSonic PJ-vTouch-10S
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Specifications
• Camere
• Output resolution: 752 x 480
• Frame Rate: 60 fps/sec
• Optical Lens: 1/3.2 inch // F#2.8 // FOV-D 181 degree // TTL18.80mm // 6G //
M12 14pie
• Tracking Active Area: 100" for 16:9 aspect ratio / 80" for 4:3 aspect ratio
• Inter-Finger Distance Specification: Middle/Center <3CM, Left &Right
Side(Bottom)< 4.5CM
• Connector: Mini USB × 1
• Power Consumption: 5 V/120mA, Less than 1 watt
• Weight: 60 g/ 2.12 oz
• Dimensions:142 x 82 x 39 (mm)
• Laser Module
• Visible Light Output: λ=830nm ±10nm
• Optical Power Output: 200 mW (single mode)
• Operating Voltage: DC 5V/1.5A , 7.5A
• Surface Flatness: <5mm
• Connector: Micro USB × 1
• Weight: 90 g/ 3.17 oz
• Dimensions: 109.8 x 65.6 x47.2 (mm)
• Stylus pen
• Pen Tip Light Emission: Infrared (850 nm)
• Charging Mode: USB Charging
• Charging Voltage Range: 4.5V ~ 5.5V
• Power Supply: 1 Super Capacitor (20F/2.7V)
• Charging Time: 3 Minute
• Using Time by a single charging: About 2 Hours
• Standby Time: 72 Hours
• Weight: 25 g/ 0.88 oz
• Dimensions: 135 x 17 x 17 (mm)
• Operating Condition: 23°F to 113°F (-5°C to 45°C)/ 0% to 95% Non-Condensing
• Storage Condition: 22°F to 140°F (-30°C to +60°C)/ 0% to 95% Non-Condensing
ViewSonic PJ-vTouch-10S - Specifications; Camera Specifications; Laser Module Specifications; Stylus Pen Specifications