English
ViewSonic PJ558D9
Control Panel
1. (power)
2. Power LED indicator
3. Keystone
/
4. Auto
5. Menu
6. Four direction buttons
7. Lamp LED indicator
8. Source
Interface Connector
1. USB connector (Service purpose)
This connector is used for engineering purpose.
2. Audio input connector
Connect an audio output from video equipment to this jack.
3. RS232 connector
When operating the projector via a computer, connect this to the controlling
computer’s RS-232C port.
4. Computer IN (D-SUB) connector (Blue)
Connect image input signal (analog) to this connector.
5. S-Video connector
Connect S-Video output from video equipment to this jack.
6. Computer Out (D-SUB) connector (Black)
Connect to a computer display, etc.
7. Video connector
Connect composite video output from video equipment to this jack.
To Next Page
Loading...
