16ViewSonic PJ558D
Using the Projector
Control Panel
1.
Refer to “Powering On/Off the Projector”.
2. Power LED indicator
Refer to “Indicator Messages”.
3. Keystone
/
Adjusts image distortion caused by tilting the projector.
4. Auto
Automatically adjusts frequency and phase. This function is available for computer
mode only.
5. Menu
Displays or exits the on-screen display menus.
6. Four direction buttons
The four direction buttons
/// can be used to scroll through OSD (On-Screen
Display) menus and make adjustments.
7. Lamp LED indicator
Refer to “Indicator Messages”.
8. Source
Manually selects an input source.
To Next Page
Loading...
