16
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see
"Shipping contents" on page 5). They are commercially available from electronics stores.
The connection illustrations below are for reference only. The rear connecting jacks available
on the projector vary with each projector model.
For detailed connection methods, see pages 17-20.
5
77
48
1
6
31
2
9
PJD7720HD
PJD6252L/PJD6551W/PJD7326/PJD7526W
7
Notebook or
desktop computer
Speakers
or
A/V device
Monitor
(DVI)
(VGA)
Microphone
or
To Next Page
Loading...
