58
Function Description
Remote Control
Code
See "Remote control code" on page 9 for details.
Advanced
Security Settings
See "Utilizing the password function" on page 24 for details.
Panel Key Lock
See "Locking control keys" on page 36 for details.
Reset Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone,
OverScan, Language, Projector Position, High Altitude
Mode, Security Settings, Remote Control Code, 3D Sync.
Current System
Status
Source
Shows the current signal source.
Color Mode
Shows the selected mode in the PICTURE menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format.
IP Address (PJD6252L/PJD6551W/PJD7326/PJD7526W)
Shows the IP address of your projector.
MAC Address (PJD6252L/PJD6551W/PJD7326/
PJD7526W)
Shows the MAC Address of your projector.
MAC Address stands for Media Access Control Address,
which is a physical layer address used to uniquely
identify a network node.
Firmware Version
Shows the current firmware version.
5. SYSTEM SETTING: ADVANCED menu
To Next Page
Loading...
