Need help?Do you have a question about the ViewSonic PJL9371 and is the answer not in the manual?
General| Projection distance | - m |
|---|---|
| Vertical scan range | 56 - 120 Hz |
| Horizontal scan range | 31 - 100 kHz |
| Projection technology | - |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, horizontal | 30 ° |
| Video in | Yes |
| Audio input | 1 |
| Aspect ratio | 4:3, 16:9 |
| Dimensions (WxDxH) | 400 x 318 x 98 mm |
| Connectivity technology | Wired |
| Focus | Manual |
| Focal length range | - mm |
| Lamp power | 260 W |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| DVI port | No |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | 0 |
| Supported video modes | 1080i, 480i, 480p, 720p |
| Analog signal format system | NTSC M, PAL, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA) |
| RMS rated power | 8 W |
| Number of built-in speakers | 2 |
| Product color | Black |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 390 W |
| Noise level | 36 dB |
| Certification | UL 60950, C-UL, FCC-B, TUV/GS, CB, CE, NOM, ROHS |
| Noise level (economic mode) | 29 dB |
| Storage temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Cables included | AC, VGA |
Weight and Dimensions| Depth | 318 mm |
|---|---|
| Width | 400 mm |
| Height | 98 mm |
| Weight | 300 g |
| Package weight | 7900 g |
Essential safety guidelines for product use and handling.
Guidelines for physical placement and screen size determination.
Instructions for connecting video sources and audio equipment.
Procedure for connecting the projector to a power source.
Procedures for turning the projector on and off.
How to switch between different video inputs.
Searching inputs, aspect ratio, position, zoom, and focus.
Fixing distortion and zooming image parts.
Navigation and operation of the on-screen menus.
Accessing frequently used settings like aspect ratio and picture mode.
Adjusting brightness, contrast, color, and sharpness.
Step-by-step guide and safety precautions for lamp replacement.
Initial steps to take when encountering issues.
To Next Page
