56
Menu Option Description
HDR
HDR/HLG
The projector supports HDR/HLG imaging sources. It can
automatically detect the dynamic range of the source, and
optimize image gamma and color settings to reproduce
contents under wide range of light conditions. You also select
SDR.
EOTF
The projector can automatically adjust the brightness levels
of your image according to the input source. Normally, the
default setting “Mid” is recommended. If the brightness of the
projected image is dark, please use “Low”. When giving priority
to gradation property, please use “High”.
Ultra Fast Input
The Ultra Fast Input function helps you deliver commands
exactly when you want without delay, giving you a competitive
advantage when gaming and improving the overall projector
gaming experience.
When enabled, the following settings will return to
factory preset values: Warping, Keystone, Corner Adj.,
Digital Lens Shift, Zoom.
NOTE: This funcon is only available when a nave ming input
signal is selected.
LAN Control Settings
(only for
PX728-4K/PX748-4K)
LAN Settings
DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address, Subnet Mask, Default Gateway,
DNS Server settings will be automatically retrieved.
Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Only available when LAN Settings is
set to Static IP. Use / to select a
column and use / to adjust the
value.
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
To Next Page
Loading...
