ViewSonic PX701HDH - Page 54

54
Menu Option Description
Lamp Settings
Lamp Mode
 Normal: Provides full lamp brightness.
 Eco: Reduces lamp power consumpon by 16% and
lowers brightness to extend the lamp life and decreases
the fan noise.
 Dynamic Eco: Reduces lamp power consumpon by up to
30% depending on the content brightness level.
 SuperEco+: Reduces lamp power consumpon by 60%
and lowers brightness to extend the lamp life and
decreases the fan noise.
NOTE: To control the lamp temperature, Eco Mode will be
switched on for 10 minutes in every 4 hours when the
Lamp Mode is set as SuperEco+.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For changing
the lamp, please contact qualified service personnel.
Lamp Hours Information
 Lamp Usage Time: Displays the number of hours the
lamp has been used.
 Equivalent Lamp Hour: Displays the overall lamp life. The
method of calculang the equivalent light source hour is
as follows: Total (equivalent) Lamp Hour = 4 x (hours used
in Normal mode) + 2 x (hours used in Eco mode) + 1.67
x (hours used in Dynamic Eco mode) + 1 x (hours used in
SuperEco+ mode)
Reset Settings
Returns all settings to the factory preset values. When
using Reset Settings, the following settings will still remain:
Zoom, Keystone, Lens Shift, Language, Projector Position,
High Altitude Mode, Security Settings, Remote Control Code,
and Baud Rate.