ViewSonic TD2465 - Page 23

23
When using the touch funcon, please note:
• The touch funcon may need about ve (5) seconds to resume if the USB
cable is removed and plugged in again, or the computer resumes from
Sleep Mode.
• The touchscreen can only detect up to ten (10) ngers simultaneously.
• If the Windows’ cursor does not accurately follow your nger when you
touch the screen, do the following:
1. Open: Control Panel > Hardware and Sound > Tablet PC Sengs
2. Select Calibraon.
3. Follow the instrucons to recalibrate your screen.
If Windows cannot idenfy the touch screen when you touch the screen, do the
following:
1. Open: Control Panel > Hardware and Sound > Tablet PC Sengs
2. Select Setup > Touch Input.
3. Follow the instrucons to idenfy the touch screen.