To Next PageTo Next PageWhat to do if the OSD Menu does not appear on the screen or the OSD controls are inaccessible on my ViewSonic VA2710-HV?
First, check whether the OSD Menu is locked. If it is, press and hold the 3 and 5 key for 10 seconds. If this doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
What to do if some menus aren’t selectable in the OSD on my ViewSonic VA2710-HV?
If some menus aren’t selectable in the OSD, try adjusting the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
How to troubleshoot no audio output from my ViewSonic VA2710-HV Monitor?
If you have no audio output, and are using ear-/headphones, ensure the mini stereo jack is connected. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
What to do if USB devices connected to my ViewSonic VA2710-HV do not work?
If USB devices connected to the monitor aren't working, make sure the USB cable is connected properly. Try changing to another USB port (if applicable). Also, note that some USB devices require a higher electric current; connect the device directly to the computer.
General