ViewSonic Corporation 13 Confidential - Do Not Copy VA703b-4_VA703m-4
2-8 MECHANICAL
Dimension
Dimension (Desktop)
Width
379mm
Height (Height adjust to the bottom)
400mm
Depth
210mm
Monitor Weight
3.6kg/7.9Ib
*Refer to Figure 1
Dimension (Head Only / Wall Mount)
Width
379mm
Height
338mm
Depth
68mm
Monitor Weight
3.3kg/7.3Ib
*Refer to Figure 1
Ergonomics
Tilt Up step 1
From 0º to +20º±3°
Tilt Down
From 0° DOWN TO -5°±3°
Swivel Right N/A
Swivel Left N/A
Height Adjust N/A
Pivot N/A
Cabinet Material
Display Head Plastic Material
ABS-HB
Neck/Base Plastic Material
ABS-HB
Internal Plastic Cabinet Components
All internal plastic cabinet components shall be in compliance with the
requirements of TCO03
Front Bezel Color
The reference for the bezel is the silver color (VA703m) and the
midnight gray color (VA703b) chip provided by ViewSonic
Neck, Base, and Rear Cover Color
The reference for the bezel is the black color (VA703m) and the
midnight gray color (VA703b) chip provided by ViewSonic.
The color difference between any two cabinet components shall be less than 0.80
“Delta E”, in the 1976 CIE L*a*b Colorspace.
Rear logo color Mold type
Cabinet Color Drift Due To UV-Light
The color drift due to UV-Light shall be less than 3.0 “Delta E” in the
1976 CIE L*a*b colorspace. Testing shall be performed according to
the requirements of ASTM Test Method D4459-93.
Cabinet Texture Mold-Tech # 11010 used on all external textured surfaces.
Samples
The supplier shall submit textured color chips, plastic material
specifications, and Material Safety Data Sheets for approval.
To Next Page
Loading...
