5
Landscape/Portrait Modes
The LCD display can operate in either Landscape or Portrait mode.
For information about compatible graph-
ics cards and approved hardware con-
figurations, go to the ViewSonic website,
http:// www.viewsonic.com
To switch from Landscape (default) to Portrait mode, do the following:
1. From the front, gently raise the LCD display to allow more clearance.
2. Pull the bottom of the LCD display outward and away from the base.
3. Manually rotate the LCD display clockwise 90 degrees as shown above.
To Raise and Lower the display
You can easily raise and lower the display panel (the head) manually. As you face
the front of the display, take hold of each side of the head and pull up or down. The
panel should move easily.
Landscape Portrait
To Next Page
Loading...
