To Next PageTo Next PageExternal device is connected, but no image appears on the ViewSonic VG2448a-2B Monitor, what to do?
Make sure the Power is On. Check the connecting cable to make sure it is properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. Adjust the brightness and contrast settings.
What to do if my ViewSonic VG2448a-2B power is on, but no image appears?
Check that the video cable connecting your monitor to the computer is properly and securely connected. Also, inspect the video cable connector for any broken pins. You may also need to adjust the brightness and contrast settings, or ensure that the correct input source is selected.
How to fix blurred screen image or text on ViewSonic VG2448a-2B Monitor?
Adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
What to do if external device is connected, but no image appears on the ViewSonic monitor screen?
First, make sure the power is on. Then, check the connecting cable to ensure it is properly and securely connected. After that, adjust the brightness and contrast settings.
What to do if the colors on my ViewSonic VG2448a-2B are wrong or abnormal?
If any colors (red, green, or blue) are missing, check the video cable to make sure it is properly and securely connected. You can also connect the monitor to another computer to test. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
What to do if control panel keys do not work on ViewSonic VG2448a-2B Monitor?
Press only one key at a time. If the problem persists, restart the computer.
Why is my ViewSonic VG2448a-2B screen not centered correctly?
Adjust the resolution to the correct Aspect Ratio. Adjust the horizontal and vertical controls via the OSD Menu. If problems persist, reset the monitor to factory settings.
What to do if the OSD Menu does not appear on ViewSonic Monitor?
Check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
Why does my ViewSonic VG2448a-2B Monitor screen appear yellow?
Make sure the “Blue Light Filter” is turned Off.
Why is there no audio output from my ViewSonic VG2448a-2B?
If you're using headphones, ensure the mini stereo jack is properly and securely connected. Make sure the volume isn't muted or set to 0. Finally, check the Audio Input setting.
General