To Next PageTo Next PageWhat to do if ViewSonic VG245 has power but no image?
If your ViewSonic monitor has power but no image, check that the video cable connecting the monitor to the computer is properly connected and secured. Also, inspect the video cable connector for bent or broken pins. Try adjusting the brightness and contrast settings. Finally, make sure the correct input source is selected.
Why no image when external device is connected to ViewSonic VG245 Monitor?
If an external device is connected to your ViewSonic monitor but no image appears, ensure the power is on. Check the connecting cable to verify it's properly and securely connected. Look for loose or broken pins in the cable connector that could cause a bad connection. Adjust the brightness and contrast settings.
How to fix a ViewSonic VG245 Monitor with no power?
If your ViewSonic monitor isn't turning on, first, ensure the monitor is switched on. Check that the power cord is correctly and securely plugged into the monitor. Then, test the power outlet by plugging in another electrical device to confirm it's supplying power.
Why does my ViewSonic VG245 screen image cut in and out?
If the screen image on your ViewSonic monitor cuts in and out, verify that the video cable connecting the monitor to the computer is properly and securely connected. Ensure that the correct input source is selected. Also, check the video cable connector for any broken pins.
How to troubleshoot wrong colors on ViewSonic VG245?
If you notice wrong or abnormal colors on your ViewSonic monitor, and if any colors (red, green, or blue) are missing, check the video cable to ensure it's properly and securely connected. Loose or broken pins in the cable connector could cause an improper connection. You can also connect the monitor to another computer to test it.
Why is my ViewSonic Monitor screen image too light or dark?
If the screen image on your ViewSonic monitor is too light or dark, try adjusting the brightness and contrast settings. If that doesn't work, reset the monitor to its factory settings.
What causes a blurred screen image on a ViewSonic Monitor?
If the screen image or text on your ViewSonic monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to its factory settings.
How do I center the screen on my ViewSonic VG245 Monitor?
If the screen on your ViewSonic monitor isn't centered correctly, adjust the resolution to the correct Aspect Ratio. You can also adjust the horizontal and vertical controls via the OSD Menu. As a last resort, reset the monitor to factory settings.
What to do if control panel keys do not work on ViewSonic Monitor?
If the control panel keys on your ViewSonic monitor aren't working, make sure you press only one key at a time. If the issue continues, try restarting the computer.
How to fix no audio output on ViewSonic VG245 Monitor?
If there's no audio output from your ViewSonic monitor, and you are using headphones, ensure the mini stereo jack is properly and securely connected. Verify that the volume isn't muted or set to 0. Also, check the Audio Input setting.
General