ViewSonic VG2448a User Manual

10
Inial Setup
This secon provides detailed instrucons for seng up your monitor.
NOTE: The monitor comes packaged in a user-friendly box to make installaon
easy.
Installing the Stand
1. Place the box on a at, stable surface and open the front ap of the box to reveal
the contents. Remove the top tray.
2. Remove the monitor stand’s base and neck. Align and connect the three (3)
points on the monitor stand’s base with the monitor stand’s neck.
3. Use the captured screw in the monitor stand’s base and secure it to the monitor
stand’s neck.
1
2

ViewSonic VG2448a Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	24 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	50, 000, 000:1
Synchronization	not applicable
Horizontal Scan Rate	82 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
Display Port Inputs	1
Mini Display Port	1
VGA Ports	1
DVI	1
Voice Assistant	no
Power Saving Mode	0.5 watts
Power Consumption	21 watts
Depth with Stand	8.0 inches
Height with Stand	15.2 inches
Width with Stand	21.6 inches
Depth without Stand	2.0 inches
Height without Stand	12.8 inches
Net Weight without Stand	12.8 pounds