ViewSonic VG2448a User Manual

5
• Fastening the display to a wall or fixed object using cordage or other restraining
devices can help support the weight of the display in order to prevent the
display from falling over.
Hole paern
(W x H)
Interface Pad
(W x H x D)
Pad Hole Screw Specicaon & Quanty
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
M4 x 10 mm
4 pieces
or
VESA wall mounng hole
NOTE:
• Restraining device/cordage should be able to withstand 100N force.
• Make sure the cordage is straightened, and any slack is removed. The back
of the device shall face the wall to ensure the device cannot tilt under
external force.
• Make sure the display does not tilt under external force at any height and
rotation angle of the device.
• If the existing display is going to be retained and relocated, the same
considerations as above should be applied.

ViewSonic VG2448a Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Touch Screen	no
Webcam	no
OS Compatibility	windows
Screen Size	24 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	50, 000, 000:1
Synchronization	not applicable
Horizontal Scan Rate	82 kilohertz
HDR	no
Built-In Speakers	yes
HDMI Ports	1
Display Port Inputs	1
Mini Display Port	1
VGA Ports	1
DVI	1
Voice Assistant	no
Power Saving Mode	0.5 watts
Power Consumption	21 watts
Depth with Stand	8.0 inches
Height with Stand	15.2 inches
Width with Stand	21.6 inches
Depth without Stand	2.0 inches
Height without Stand	12.8 inches
Net Weight without Stand	12.8 pounds