32
FAQ:
1. Question: if I lost AutoProject key. How to make New/Another AutoProject
Key?
Answer:
• Download Software from
• Unzip to USB disk
• Reanme USB disk name to “AutoProject”
2. Question: why can I not play screen
Answer:
• If Laptop native resolution over 1920x1080, please select “Enable Auto Scale
down” on software setting of Menu.
3. Question: when I install ViewSync 3 software, I meet the problem which
show .Net Framework not ready
Answer: please follow the below process to enable it.
4. Question: when I play screen to ViewSync3, I meet resoltion is incorrection.
Answer: Please disable Auto Adjust resolution on setting of AutoProject
software menu.
5. Question: When I play screen to ViewSync 3, Screen is black
Answer: some of Notebook cannot support hardware encode, please disable
Powerpoint mode on setting of AutoProject software menu.
6. Question: when I swith to 5G or link to 5G wifi router. ScreenMirroring
function is disable.
Answer: because ScreenMirroring must handshaking on 2.4G, so if ViewSync
3 change to 5G, ScreenMirroring will be disable, or please manual disable
"ScreenMirroring" to get more stability when wifi link.
To Next Page
Loading...
