ViewSonic VOT120 - Chipset Menu; Table 9 Chipset Menu

ViewSonic
VOT120 18
Hit ‘F2’ Message Display [Enabled]
When set to Enabled, the system displays the message ‘Press F2 to run Setup’
during POST.
Options: Disabled, Enabled
 Chipset Menu
Table 9 Chipset Menu
BIOS SETUP UTILITY
Main Advanced Boot Chipset Power Security Exit
Chipset Settings
DRAM Frequency [Auto]
Internal Graphics Mode Select [Enabled, 8MB]
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [128M]
Options
Auto
400 MHz
533 MHz
<> Select Screen
↑↓ Select Item
+- Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
DRAM Frequency [Auto]
Options: Auto, 400 MHz, 533MHz
Internal Graphics Mode Select [Enabled 8MB]
Select the amount of system memory used by the internal graphics device.
Options: Enabled 1MB, Enabled 8MB
DVMT Mode Select [DVMT Mode]
Options: Fixed Mode, DVMT Mode, Combo Mode
DVMT/FIXED Memory [128MB]
Options: 64MB, 128MB, Maximum DVMT