46
L
Low input lag
ViewSonic offers low input lag, utilizing a monitor process reducer, which
decreases signal latency. Under the low input lag submenu, you can
select the appropriate speed for your desired use from the two options
M
Manual image adjust
Displays the Manual Image Adjust menu. You can manually set a variety
of image quality adjustments.
Multi-picture
Under MULTI-PICTURE MODE you can select the following settings,
PBP LEFT-RIGHT, and PIP. The explanations for each setting are
below.
1. PBP LEFT-RIGHT: You can select 2 picture split screen types, and
display 2 pictures side-by-side on the left and right.
2. PIP: Two picture split screen types, display large and the small
pictures on the screen.
3. PIP SIZE: This controls the size of the sub-picture used in PIP.
4. PIP POSITION: This controls the position of sub-picture used in PIP
mode.
5. PIP SWAP: This swaps the main-picture source and the sub-picture
source.
6. SOURCE SELECT: This selects the source of the MULTI-PICTURE
use in the PBP LEFT-RIGHT and PIP.
Memory recall
Returns the adjustments back to factory settings if the display is
operating in a factory Preset Timing Mode listed in the Specifications of
this manual.
* Exception: This control does not affect changes made with the
Language Select or Power Lock setting
To Next Page
Loading...
