ViewSonic VS13727 - Chapter 2 Use Computer; Connect Computer; Adjust LCD; Use All-In-One PC

ViewSonic VPC191
5
Chapeter2:UseComputer
2.1ConnectComputer
· Connect your power adapter to the correct interface located at the back of
the computer.
· Connect your keyboard cable to the correct interface (USB interface)
· Connect your mouse cable to the correct interface (USB interface)
2.2AdjustLCD
· Adjust your LCD with look-down view to the proper angle ( -3 degree ~25
degree)
[Attention] Hold rmly when carry the computer, do not grasp the support
frame directly.
2.3UseAll-In-OnePC
· Press the switch on/off button under the bottom of the main screen, power
on the computer and enter the operation system.