ViewSonic VS13727 - Install the Driver Program

ViewSonic VPC191
10
Exit menu: exit the BIOS Setup after completed the relevant setup.
Exit Saving Changes:store the value and exit.
Exit Discarding Changes: without storing the value and exit.
Load Setup Defaults:restore the factory value.
Discard Changes: discard this setting, and return to the last setting.
Save Changes:save the setting.
3.3InstalltheDriverprogram
Please use the CD attached with the machine to operate in accordance
with the CD operation interface.
Option 1: Computer-specic driver.
Option 2: Application Software.
Choose the driver program you need and operate according to the screen
instruction. System will install the driver program automatically; during the
process, the system may restart.