ViewSonic VX2035wm User Manual

ViewSonic VX2035wm 16
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that the outlet is
supplying proper voltage.
Power is ON but no screen image
• Make sure the video cable supplied with the LCD display is tightly secured to the video
output port on the back of the computer. If the other end of the video cable is not attached
permanently to the LCD display, tightly secure it to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic
®
for a non-DDC adapter.
Control buttons do not work
• Press only one button at a time.

ViewSonic VX2035wm Specifications

Display

display area	17.1" horizontal x 10.7" vertical; 20.1" diagonal
optimum resolution	1680x1050
contrast ratio	800:1 (typ)
viewing angles	160° horizontal, 160° vertical
response time	5ms white-black-white (typ); 8ms gray-to-gray (avg)
brightness	300 cd/m2 (typ)

Power

voltage	AC 100–240V, 50–60Hz
power consumption	43W (typ)

Audio

speakers	2x1.5-watt

Operating Environment

operating temperature	32–104°F (0–40°C)
operating humidity	20–90% (non-condensing)

Weight and Dimensions

physical dimensions with stand	19.3" x 18" x 9.6" (491mm x 458mm x 244mm)
physical dimensions without stand	19.3" x 14.3" x 2.8" (491mm x 364mm x 70mm)
net weight with stand	15.4 lb. (7.0 kg)
net weight without stand	12.8 lb. (5.8 kg)
gross weight with stand	18.9 lb. (8.6 kg)