ViewSonic VX2035wm User Manual

ViewSonic VX2035wm 7
Wall Mounting (Optional)
To obtain a wall-mounting kit, contact ViewSonic
®
or your local dealer. Refer to the
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
1. Verify that the Power button is turned Off, then
disconnect the power cord.
2. Lay the LCD display face down on a towel or
blanket.
3. Remove the Plastic Covers from the back of the
LCD display.
4. Remove the four screws attaching the base.
5. Remove the Rubber Plugs from inside the four
VESA screw holes.
6. Attach the mounting bracket from the VESA
compatible wall mounting kit (100 mm x 100 mm
distance).
7. Attach the LCD display to the wall, following the
instructions in the wall-mounting kit.
Four VESA screw holes

ViewSonic VX2035wm Specifications

Display

display area	17.1" horizontal x 10.7" vertical; 20.1" diagonal
optimum resolution	1680x1050
contrast ratio	800:1 (typ)
viewing angles	160° horizontal, 160° vertical
response time	5ms white-black-white (typ); 8ms gray-to-gray (avg)
brightness	300 cd/m2 (typ)

Power

voltage	AC 100–240V, 50–60Hz
power consumption	43W (typ)

Audio

speakers	2x1.5-watt

Operating Environment

operating temperature	32–104°F (0–40°C)
operating humidity	20–90% (non-condensing)

Weight and Dimensions

physical dimensions with stand	19.3" x 18" x 9.6" (491mm x 458mm x 244mm)
physical dimensions without stand	19.3" x 14.3" x 2.8" (491mm x 364mm x 70mm)
net weight with stand	15.4 lb. (7.0 kg)
net weight without stand	12.8 lb. (5.8 kg)
gross weight with stand	18.9 lb. (8.6 kg)