Why aren’t some menus selectable in the OSD on my ViewSonic VX2418-PC-mhd?
If some menus aren’t selectable in the OSD of your ViewSonic Monitor, adjust the ViewMode or the input source. If the issue persists, reset the monitor to factory settings.
How to fix no audio output on ViewSonic Monitor?
If you are experiencing no audio output from your ViewSonic Monitor, and are using ear-/headphones, ensure the mini stereo jack is connected. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
What to do if control panel keys do not work on ViewSonic Monitor?
If the control panel keys on your ViewSonic Monitor do not work, press only one key at a time. If the issue continues, try restarting the computer.
Why will my ViewSonic Monitor not adjust?
If the ViewSonic monitor will not adjust, make sure there are no obstructions near or on the monitor, and that there is adequate spacing.
What to do if USB devices connected to ViewSonic VX2418-PC-mhd do not work?
If USB devices connected to your ViewSonic Monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port, if applicable. Some USB devices require a higher electric current, so connect the device directly to the computer.
General| Screen Size | 24 inches |
|---|---|
| Response Time | 1ms (MPRT) |
| Panel Type | VA |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Curvature | Flat |
| Viewing Angle | 178° (H) / 178° (V) |
| Color Gamut | 72% NTSC |
| VESA Mount | 100 x 100 mm |
| Resolution | 1920 x 1080 (FHD) |
| Refresh Rate | 144 Hz |
| Contrast Ratio | 3000:1 |
| Ports | HDMI, DisplayPort |
To Next Page