To Next PageTo Next PageWhy is there no power on my ViewSonic Monitor?
First, ensure that you have turned on the ViewSonic monitor using the power button. Then, verify that the power cord is correctly and securely connected to both the monitor and the power outlet. Lastly, test the power outlet with another electrical device to confirm it is working.
What to do if power is on, but no image appears on ViewSonic Monitor screen?
Ensure the video cable connecting your ViewSonic monitor to the computer is properly and securely connected. Also, adjust the brightness and contrast settings. Finally, verify that the correct input source is selected.
What to do if the external device is connected, but no image appears on the ViewSonic monitor screen?
Ensure that the power is on. Adjust the brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected, as loose or broken pins in the cable connector could cause an improper connection.
How to fix wrong or abnormal colors on ViewSonic VX2718-2KPC-mhd?
If any colors (red, green, or blue) are missing on your ViewSonic monitor, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer to test it. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
What to do if screen image cuts in and out on ViewSonic VX2718-2KPC-mhd?
Make sure the correct input source is selected on your ViewSonic monitor. Check the video cable connector for bent or broken pins. Also, ensure the video cable connecting the monitor to the computer is properly and securely connected.
Why is the screen image too light or dark on my ViewSonic Monitor?
Adjust the brightness and contrast settings on your ViewSonic monitor via the OSD Menu. Alternatively, reset the monitor to its factory settings.
How to fix a blurred screen image on ViewSonic VX2718-2KPC-mhd?
Adjust the resolution to the correct Aspect Ratio on your ViewSonic monitor. If that doesn't work, try resetting the monitor to factory settings.
Why do USB devices connected to my ViewSonic Monitor not work?
First, make sure the USB cable is connected properly to your ViewSonic monitor. If applicable, try changing to another USB port. Note that some USB devices require a higher electric current, so try connecting the device directly to the computer.
Why isn’t the screen centered correctly on my ViewSonic VX2718-2KPC-mhd Monitor?
Adjust the horizontal and vertical controls via the OSD Menu on your ViewSonic monitor. Also, check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
Why does the screen appear yellow on my ViewSonic VX2718-2KPC-mhd?
Make sure the “Blue Light Filter” is turned Off on your ViewSonic monitor.
General| Color | black |
|---|---|
| Screen Type | led |
| Tiltable | yes |
| Wall Mount | 75mm x 75mm |
| Touch Screen | no |
| Webcam | no |
| OS Compatibility | not applicable |
| Screen Size | 27 inches |
| Panel Type | mva |
| Aspect Ratio | 16:9 |
| Resolution | 2560 x 1440 |
| Native Resolution | 2560 x 1440 |
| Refresh Rate | 165hz |
| Horizontal Viewing Angle | 178 degrees |
| Vertical Viewing Angle | 178 degrees |
| Response Time | 1 milliseconds |
| Brightness | 250 candela per square meter |
| Contrast Ratio | 80, 000, 000:1 |
| Synchronization | not applicable |
| Horizontal Scan Rate | 0.24 kilohertz |
| HDR | no |
| Built-In Speakers | yes |
| Interface Connectors | 1 x displayport 1.2 |
| HDMI Ports | 2 |
| Display Port Inputs | 1 |
| Headphones Output | yes |
| Voice Assistant | no |
| Power Saving Mode | 0.5 watts |
| Power Consumption | 26 watts |
| Depth with Stand | 8 43/50 inches |
| Height with Stand | 18 7/10 inches |
| Width with Stand | 24 1/10 inches |
| Depth without Stand | 3 inches |
| Height without Stand | 14 3/10 inches |
| Net Weight without Stand | 7.28 pounds |
Lists all items included in the monitor package.
Visual representation of the monitor's front and back panels.
Identifies and describes the monitor's input/output connection ports.
Step-by-step instructions for attaching the monitor stand.
Guidelines and specifications for mounting the monitor on a wall.
Instructions on how to use a security lock to prevent theft.
Procedure for connecting the monitor to a power source.
Guide on connecting video sources like PCs and audio devices.
Instructions on how to tilt the monitor for optimal viewing.
Steps to power the monitor on and off.
Explanation of the monitor's physical control buttons.
Accessing and using the monitor's quick access menu options.
Functionality of special key combinations for advanced control.
Navigating and adjusting settings within the OSD menu.
Technical details and performance characteristics of the monitor.
Definitions for terms starting with A and B.
Definitions for terms starting with C through I.
Definitions for terms starting with M through S.
Definition for the term ViewMode.
Solutions for problems related to power and screen display.
Troubleshooting tips for color, brightness, and image distortion.
Solutions for issues with OSD controls, buttons, and audio output.
Troubleshooting for external device connections and USB functionality.
Important safety guidelines for maintaining the monitor.
Instructions for safely cleaning the monitor's display surface.
Methods for cleaning the monitor's external casing.
Details on regulations and compliance statements for the product.
Information regarding the product's compliance with RoHS2 directives.
Statement on hazardous substance restrictions in India.
Guidance on environmentally responsible disposal of the product.
Legal notices and copyright details for the manual and product.
Contact information and procedures for technical support and service.
Details on warranty coverage, duration, exclusions, and how to get service.
Specific warranty terms applicable to Mexico.
Directory of sales and service contacts within Mexico.
