ViewSonic VX2739wm-1 - Adjusting Procedure

5. Adjusting Procedure
5.1 Function Control Description
5.1.1 Main Menu OSD Table
Main Menu
Level 1 Level 2 Level 3
Auto Image Adjust
1. Background = blanking
2. The message OSD position
is at the center.
3. After auto tune, OSD shall
be off
4. Only for analog mode
1. Key button definition:
[1]: OSD off
[2]: Execute the selected function
[Up]: Rolling up the slider
(When push the button on the top position,
the slider shall go down to the bottom item)
[Dn]: Rolling down the slider
(When push the button on the bottom
position, the slider shall go down to the top
item)
2. Under sRGB or DCR mode, the
Contrast/Brightness shall be disabled with
fate-out color. And it should not be selected.
ViewSonic Corporation
VX2739wm-1
VX2739wm-CN
CONFIDENTIAL – DO NOT COPY
21