ViewSonic VX2739wm-1 - Page 23

D-SUB
Step 1: Turn off OSD.
Step 2:
1. Target video input port =
Analog
2. If signal detected from
target port, change to
target port.
3. If no signal detected from
target port, keep existing
input port.
Step 3: Show on Input
Message OSD at the
right-top corner of screen for
1 second.
Input Select
1. Show on existing input port
by white-background color
2. Key button definition:
[1]: Back to previous OSD
status
[2]: Change to the selected
input port
[Up]: Move up the slider
[Dn]: Move down the slider
DVI
Step 1: Turn off OSD.
Step 2:
1. Target video input port =
Digital
2. If signal detected from
target port, change to
target port.
3. If no signal detected from
target port, keep existing
input port.
Step 3: Show on Input
Message OSD at the
right-top corner of screen for
1 second.
ViewSonic Corporation
VX2739wm-1
VX2739wm-CN
CONFIDENTIAL – DO NOT COPY
23