ViewSonic VX2739wm-1 - Page 37

1. Show on existing Aspect
Ratio setting by
white-background color
2. Key button definition:
[1]: Back to previous OSD
status
[2]: Change to the selected
Display Mode setting.
[Up]: Scroll up the slider
(When push the button
on the top position, the
slider shall go down to the
bottom item)
[Dn]: Scroll down the slider
(When push the button
on the bottom position, the
slider shall go up to the top
item)
3. Default = full screen
Note : 1.When input signals
are wide format, this
function is disable.
2.When input signals are
non-wide format. this
function is enable.
Full Screen
Fill screen with panel
native aspect ratio.
ViewSonic Corporation
VX2739wm-1
VX2739wm-CN
CONFIDENTIAL – DO NOT COPY
37