ViewSonic VX2739wm-1 - Page 46

Auto Power Off
Swap on and off the Auto
Power Off function
Power off the display
automatically when no signal is
detected for 3 minutes.
; = On
 = Off
Note :
1. When no signal input with
Auto Power Off = ON, the
display will go into power
saving first. After 3 minutes, the
display will turn off
automatically.
2. When no signal input with
Auto Power Off = OFF, the
display will go into power
saving as normal display.
3. Default = Off
4. Memory Recall will call
back the setting to default.
5. When push Power Lock
hot key under Auto Power
Off = On, the message OSD
will show on for 3 seconds
(Power Lock function is
disabled),
6. The function will be
disabled when power button
locked.
ViewSonic Corporation
VX2739wm-1
VX2739wm-CN
CONFIDENTIAL – DO NOT COPY
46