EasyManuals Logo

ViewSonic VX715 User Manual

ViewSonic VX715
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
ViewSonic VX715 9
Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 30
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
4. To adjust the setting, press the upSor downTbuttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to
the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's
user guide.)
If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the Brightness control.

Other manuals for ViewSonic VX715

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic VX715 and is the answer not in the manual?

ViewSonic VX715 Specifications

General IconGeneral
Response time25 ms
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range85 Hz
Horizontal scan range82 kHz
Viewing angle, vertical130 °
Viewing angle, horizontal140 °
Display brightness (typical)300 cd/m²
Panel mounting interface100 x 100 mm
Power requirementsAC 110/230 V ( 50/60 Hz )
I/O ports1 x VGA - 15 pin HD D-Sub (HD-15) 1 x DVI-D - 24 pin digital DVI
CompatibilityPC/Mac
CertificationTCO '03, FCC Class B certified, CE, MPR II, UL, TUV GS, VCCI, C-Tick, BSMI, ISO 9001, GOST, cUL, EPA Energy Star, GS, ISO 13406-2, NEMKO, NOM, PCBC, SASO, TCO '99, ISO 14001, CB, CCC, TUV Ergo, PSB
Market positioning-
Power consumption (typical)35 W
Operating relative humidity (H-H)20 - 90 %
Maximum operating temperature range (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)176 mm
Width (without stand)388 mm
Height (without stand)438 mm
Weight (without stand)5000 g

Related product manuals