EasyManuals Logo

ViewSonic VX715 User Manual

ViewSonic VX715
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
ViewSonic VX715 2
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in
this guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the equipment. When a cart is used, use caution when moving the cart/
equipment combination to avoid injury from tipping over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.

Other manuals for ViewSonic VX715

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic VX715 and is the answer not in the manual?

ViewSonic VX715 Specifications

General IconGeneral
Response time25 ms
Display diagonal17 \
Display resolution1280 x 1024 pixels
Vertical scan range85 Hz
Horizontal scan range82 kHz
Viewing angle, vertical130 °
Viewing angle, horizontal140 °
Display brightness (typical)300 cd/m²
Panel mounting interface100 x 100 mm
Power requirementsAC 110/230 V ( 50/60 Hz )
I/O ports1 x VGA - 15 pin HD D-Sub (HD-15) 1 x DVI-D - 24 pin digital DVI
CompatibilityPC/Mac
CertificationTCO '03, FCC Class B certified, CE, MPR II, UL, TUV GS, VCCI, C-Tick, BSMI, ISO 9001, GOST, cUL, EPA Energy Star, GS, ISO 13406-2, NEMKO, NOM, PCBC, SASO, TCO '99, ISO 14001, CB, CCC, TUV Ergo, PSB
Market positioning-
Power consumption (typical)35 W
Operating relative humidity (H-H)20 - 90 %
Maximum operating temperature range (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)176 mm
Width (without stand)388 mm
Height (without stand)438 mm
Weight (without stand)5000 g

Related product manuals