ViewSonic XG270Q - Elite RGB Lighting

57
Elite RGB Lighng
This seng controls the RGB lighng on the back of the monitor and beneath the
bezel. When “On”, or aer being reset, the default ‘Breathing’ mode will be acve.
To enter the Elite RGB menu:
1. Press the [●] key or move the joy key [◄] or [▲] or [▼] to display the On-Screen
Display (OSD) Menu.
2. Move the joy key [◄] or [►] to select Setup Menu. Then move the joy key [▼] to
enter the Setup Menu menu.
3. Move the joy key [▲] or [▼] to select Elite RGB. Then move the joy key [►] to
enter its sub-menu.
4. Move the joy key [▲] or [▼] to select your preference. Then press the [●] key to
conrm the selecon.
NOTE: Some sub-menu opons may have another sub-menu. To enter the
respecve sub-menu, move the joy key [►].
In addion, the RGB backlights are also synced with several key partners.
Downloading their soware will give you the power to adjust your RGB capabilies
further.
To setup up partner RGB soware:
1. Visit: hps://www.viewsonic.com/elite/rgb/
2. Select a partner RGB soware, and download it.
3. Connect one end of the USB Type B cable to the monitor and the other end to
your computer.
4. Run and install the partner soware.
5. Start customizing the monitor’s RGB lighng.