ViewZ VZ-19CME - Remote Control Function

9User Manual Visit the ViewZ USA website at https://www.viewzusa.com
MENU
DVIHDMI VGA
4:3
16:9
AUTO EXIT
MUTE
Remote Controller Function
REMOTE FUNCTION
q
w
o
i
e
a
t
d
r
s
y
f
u
1. Power
2. Auto: Auto Adjustment for Input Source
3. Up
4. Right
5. Menu: Enter OSD Menu
6. Le
7. Down
8. Mute: Sound Mute On/O
9. Exit: OSD Selecon Cancel & Back / Close OSD Menu
10. 4:3/16:9: Adjust Aspect Rao
11. HDMI Input Select
12. DVI Input Select
13. VGA Input Select
Display image, sound and custom sengs can be adjusted in OSD (On Screen Display) menu by remote controller.
To adjust monitor seng value :
1. Press the 'MENU' buon to enter the OSD menu
2. Press the ▲ / ▼ buons to select the desired sub-menu. The selected sub-menu will be highlighted
3. Press the 'MENU' buon to enter the sub-menu to adjust dierent items
4. 4. Change the value you wish to adjust by using the ◄ / ► buons
5. Press the 'MENU' buon to conrm the adjustment on sub-menu
6. Press the 'EXIT' buon to exit the sub-menu to go back to the previous menu
7. Press the 'AUTO' buon to adjust monitor setup automacally. It only works for VGA input
8. Without entering OSD MENU, press ◄ / ► buons to adjust the audio volume
9. Without entering OSD MENU, press HDMI, DVI & VGA buons to select desired input source
10. Press '4:3 / 16:9' buon to change aspect rao or zoom
VGA input source only allows monitor to change the screen to 4:3 and 16:9 aspect rao
HDMI & DVI input sources allow monitor to change the screen to 4:3 and 16:9 aspect rao, or make the zoom for monitor
11. Press the 'MUTE' buon to on / o audio