VIGAS 25 Lambda Control

Other manuals for VIGAS 25 Lambda Control

Manual For Installation, Assembly, Maintenance And Use38 pages

Need help?

Do you have a question about the VIGAS 25 Lambda Control and is the answer not in the manual?

Summary

1. TECHNICAL DESCRIPTION

AK4000 Control System Features

Describes the AK4000 control system and its features.

2. TECHNICAL DATA

3. DESCRIPTION OF AK4000 CONTROL

3.1 SAFETY INSTRUCTIONS

Essential safety precautions for operating the AK4000 control unit.

4. BASIC CONFIGURATION OF VIGAS BOILER WITHOUT EXHAUST FAN

5. VIGAS BOILER CONFIGURED WITH DISCHARGE FAN

6. VIGAS Lambda Control IN BASIC CONFIGURATION WITHOUT EXHAUST FAN

7. VIGAS Lambda Control BOILER CONFIGURED WITH THE DISCHARGE FAN:

8. TEMPERATURE SET-UP

9. SET-UP PARAMETERS:

9.1 MAXIMUM EXHAUST GAS TEMPERATURE SET UP

Setting the maximum exhaust gas temperature to optimize fan speed and efficiency.

9.3 LAMBDA VALUE SET-UP

Adjusting the lambda value to control oxygen surplus for efficient burning.

9.5 FAN MINIMUM OUTPUT SET-UP

Setting the minimum fan speed to control operation and shutdown.

12. ERROR NOTIFICATIONS

12.1 STB failure

Details the cause and solution for STB (overheating) failure.

13. SERVICE SETTINGS PIN 0000 PROTECTED

13.1 SERVICE SETTINGS

Access to advanced service settings requiring a PIN.

14. OPERATING INSTRUCTIONS

14.1 Before operation:

14.2 Boiler in operation

Step-by-step guide for starting and operating the boiler.

15. BOILER MAINTENANCE AND REPAIRS

18. PROBLEMS, CAUSES AND SOLUTIONS

19. ASSEMBLY REGULATIONS

19.1 ASSEMBLY AND INSTALLATION INSTRUCTION

19.2 ELECTRICAL EQUIPMENT CONTROL AND MAINTENANCE SAFETY REGULATIONS

20. ELECTRIC SCHEME