16
Gasifying boiler Vigas
9.8 DISPLAY INTENSITY SET-UP
9.9 DISPLAY CONTRAST SET-UP
9.10 SCROLLING MENU SET-UP
10. TIME SET-UP
11. HARDWARE AND SOFTWARE INFORMATION
12. ERROR NOTIFICATIONS
By pressing „ENTER“ button, values start flashing. Pressing ▲
choose correct time and date. Mon – Monday, Tue – Tuesday, Wed –
Wednesday, Thu – Thursday, Fri – Friday, Sat – Saturday, Sun –
Sunday.
Warning : During an electricity power-cut clock will stop.
To retrieve information setting, press and hold „ENTER“ button at any boiler phase and press button
. Confirm by
pressing „ENTER“. Use buttons ▲
to choose module and confirm by pressing „ENTER“. Information about the
module will be indicated on the display.
AK4000D – Display, AK4000S – Power board unit, AK4000L –
Lambda board module.
To recall error notification press and hold „ENTER“ button at any boiler phase and press
button
twice
. By pressing „ENTER“, error with description will be indicated on the display.
Choose display intensity value. Select value between
0 and 100.
option on the display (pic.7) will
show actual boiler values - for example: fan speed,
boiler temperature, exhaust gas temperature, etc. By
choosing „no“ option, selection can be made using
buttons ▲
.
Set-up time and date when the boiler is first plugged in. Time is indicated in the upper left hand corner of
the display. To retrieve parametre settings press and hold „ENTER“ at any boiler phase and then press
▲ button twice.
2 sec.
2 sec.
2 sec.
To Next Page
Loading...
