Need help?Do you have a question about the VIGAS 40 Lambda Control and is the answer not in the manual?
Provides crucial safety guidelines for using the AK4000 control.
Details the control interface and operation phases for basic configuration.
Explains how to set the boiler temperature.
Details how to change various setup parameters.
Explains STB failure cause and reset procedure.
Accessing and understanding service settings for boiler type, lambda, and thermometer.
Checklist of tasks before operating the boiler.
Step-by-step guide for starting and operating the boiler.
Instructions for refilling the fuel chamber.
How to clean the gasification chamber.
How to clean the combustion chamber.
How to clean the heat exchanger pipes.
Information on heatproof nozzle and flap/servo-unit setup for Lambda Control.
How to set up secondary air flaps for optimal burning.
How to clean lambda sensor, thermometer, and secondary air system.
Details the safety drain valve and its assembly.
Lists common boiler problems, their causes, and solutions.
Detailed instructions for boiler assembly and installation.
Safety regulations for electrical equipment during service.
To Next Page
General