www.vikingsecuritysafe.com | Help@VikingSecuritySafe.com
MOUNTING METHOD
Fix the safe in the place which is not easy to move.
• Drill holes for expansion bolts (or clamping screws) in the right place.
• Turn the expansion bolts counterclockwise to separate.
• Use the expansion bolts (or clamping screws) to secure the safe to the wall.
• Make sure the safe is mounted in place as required and then tighten all screws.
page 6/6
CAUTION
Use the expansion bolt when there is a concrete wall surface. Use the clamping screw when there
is a wooden wall surface.
Wall
Wall
Safe
1
2
3
Wall
Safe
CARE AND MAINTENANCE
To maximize the security and performance of the safe, keep Glass Fingerprint Scanner F clean
• Use a dry cloth to remove any smudges or prints off the Fingerprint Scanner after use
• Use gentle cleaning agents to clean the safe and Glass Fingerprint Sacnner
• Test registered fingerprints and PIN code every 6 months
• Keep liquids away from the control panel. Spills on the control panel will cause damage and possibly electric shock
• Secure safe in a proper area to prevent from falling and causing damage or injury
• DO NOT disassemble the product. For all repairs, contact Viking Security Safe Customer Service
Give Viking Security Safe a chance to help if you have
questions or an issue with your safe. Please, let us
know how you like your new Viking safe.
®
WARNING
Never store firearms and ammunition together. The safest protection against accidents involving
children is to store your firearm unloaded in an approved Firearm Safety Lock Box, with ammunition
stored separately.
11-16-2021
To Previous Page
Loading...
