Page 6 For technical questions, please call 1-888-866-5797. 59531
SAFETY OPERATION MAINTENANCESETUP
Charging the Jump Starter
WARNING! TO PREVENT SERIOUS INJURY: Always charge on a non-flammable surface.
Press and hold the Battery Test Button on the front
of the unit to check the battery power level.
a. Green light is ready for use.
b. Yellow light needs to be charged.
c. Red light should be charged immediately.
Turn the Clamp Power Switch on front
of unit to the OFF position.
Note: Before initial use, completely
charge the Jump Starter.
1. Plug the 120VAC Adapter into a 2 or 3-prong outlet.
2. Slide the Adapter socket onto the 120VAC
Charging Input on the back of the Jump Starter.
Approximate
AC Charge Time
Initial Charge:
15 hours
Recharge:
12 hours
3. The Charging Indicator lights will illuminate in a
cycle from red, to yellow, to green while the unit
is charging. The green Charging Indicator light
will remain on after charging is complete.
The battery power level must be checked
periodically when charging, and the Jump Starter
must be unplugged when it is fully charged.
NOTE: FAILURE TO RECHARGE Jump
Starter WILL VOID WARRANTY.
NOTE: When Jump Starter voltage drops
below 11V, alarm will sound indicating
Jump Starter battery needs charged.
4. Recharge:
a. When yellow light comes on while
pressing the Battery Test Button.
b. After each Jump-Start.
c. Once a month.
To Next Page
Loading...
