To Next PageTo Next Page
Need help?Do you have a question about the Viking 63350 and is the answer not in the manual?
Key safety guidelines, warnings, and precautions for operating the battery charger.
Guidelines for personal protection and safety when working with batteries.
Steps for safely charging batteries, both inside and outside a vehicle.
Proper grounding and electrical connection safety instructions.
Technical specifications for the Viking 4 Amp High Frequency Charger/Maintainer.
Identification and description of the charger's controls and components.
General instructions for operating the battery charger.
Steps to prepare the battery and environment before charging.
Recommendations for optimal and safe placement of the charger.
How the charger operates, including modes and display indicators.
Guidelines for inspecting, cleaning, and maintaining the battery charger.
Details of the product's warranty terms and conditions.
Key safety guidelines, warnings, and precautions for operating the battery charger.
Guidelines for personal protection and safety when working with batteries.
Steps for safely charging batteries, both inside and outside a vehicle.
Proper grounding and electrical connection safety instructions.
Technical specifications for the Viking 4 Amp High Frequency Charger/Maintainer.
Identification and description of the charger's controls and components.
General instructions for operating the battery charger.
Steps to prepare the battery and environment before charging.
Recommendations for optimal and safe placement of the charger.
How the charger operates, including modes and display indicators.
Guidelines for inspecting, cleaning, and maintaining the battery charger.
Details of the product's warranty terms and conditions.
The VIKING 4 AMP High Frequency Charger/Maintainer is a versatile device designed for charging and maintaining lead-acid batteries. Its primary function is to provide a reliable and safe charging solution for both 6V and 12V batteries, ensuring they are kept in optimal condition. The charger is equipped with features that make it suitable for various charging scenarios, whether the battery is installed in a vehicle or charged externally.
One of the key usage features of this charger/maintainer is its ability to automatically determine the battery voltage (6V or 12V) and adjust its charging process accordingly. This eliminates the need for manual voltage selection, simplifying operation. Users can also select from different 12V modes, including 12V STD (Standard), 12V AGM, 12V STD + Snowflake (Winter Mode for Standard Batteries), and 12V AGM + Snowflake (Winter Mode for AGM Batteries), by pressing the MODE button. This allows for tailored charging based on the battery type and environmental conditions. For gel cell batteries, the 6V STD or 12V STD mode should be used, ensuring the batteries are at room temperature before charging. The charger also automatically selects the appropriate charge current based on the battery's capacity and power, further optimizing the charging process.
The device incorporates several safety features to protect both the user and the battery. It includes warnings against explosive gases generated by lead-acid batteries and emphasizes the importance of following connection procedures to prevent sparks. When connecting the charger to a battery installed in a vehicle, specific steps are outlined to ensure proper grounding and avoid short-circuiting. For instance, connecting the positive (RED) clip to the positive battery post and the negative (BLACK) clip to the vehicle chassis or engine block, away from the battery, is crucial for negative-grounded vehicles. The reverse procedure is specified for positive-grounded vehicles. Similarly, when charging a battery outside a vehicle, detailed instructions are provided for connecting an insulated battery cable to the negative post before attaching the charger clips.
The charger's display provides clear feedback on the charging status. It indicates battery capacity and voltage, and the backlight changes color to signify different states: green for a good connection and fully charged status, and red when the battery voltage is low or during a repair attempt. If the battery voltage is below a certain threshold (10.5V for 12V batteries or 5.2V for 6V batteries), the charger will automatically attempt a 1-hour repair cycle. If the repair is successful, normal charging resumes; otherwise, a "Bad Battery" symbol will appear, and charging will stop. Once the battery is fully charged, the charger automatically enters maintenance mode, preventing overcharging and prolonging battery life.
Maintenance features for the VIKING charger/maintainer are straightforward, focusing on inspection and cleaning to ensure safe and effective operation. Before each use, users are advised to inspect the charger for loose hardware, cracked or broken parts, damaged electrical wiring or cable insulation, and any other condition that might affect its safe operation. After use, the external surfaces of the tool should be wiped with a clean cloth. It is explicitly stated that the charger housing should not be opened, as there are no user-serviceable parts inside. Any repairs or replacement of the supply cord must be performed by a qualified service technician to maintain safety. The manual also stresses the importance of unplugging the charger and disconnecting it from the battery before performing any inspection, maintenance, or cleaning procedures, and allowing it to cool completely. This adherence to maintenance guidelines helps ensure the longevity and safe performance of the device.
General| Input Voltage | 120V AC |
|---|---|
| Output Voltage | 12V DC |
| Compatible Battery Types | AGM, Gel |
| Charging Modes | Automatic |
| Safety Features | Reverse Polarity Protection, Overcharge Protection, Short Circuit Protection |
