To Next PageTo Next Page
Need help?Do you have a question about the Viking 63299 and is the answer not in the manual?
General| Input Voltage | 120V AC |
|---|---|
| Charging Amperage | 10A |
| Output Voltage | 12V DC |
| Output Current | 10A |
| Compatible Battery Types | AGM, Gel |
| Safety Features | Reverse Polarity Protection, Overcharge Protection, Short Circuit Protection |
Keep manual for safety, operating, maintenance. Record serial number and store safely for future reference.
Read all material before use. Failure to do so can result in serious injury. Save this manual.
Defines DANGER, WARNING, CAUTION, NOTICE symbols for personal injury hazards and their severity.
Defines electrical terms like VAC, Amperes, Cold Cranking Amps, Reserve Capacity, Ampere-hours for clarity.
Explains markings related to eye injury risk, reading manual, and fire risk, including recommended precautions.
Covers saving manual, avoiding water exposure, using proper extension cords, and safe disconnection methods.
Details risks of explosive gases during battery operation and essential precautions to prevent explosion.
Advises on having assistance, water/soap, eye protection, handling acid contact, avoiding sparks, and removing metal jewelry.
Steps to remove battery, ensure ventilation, clean terminals, and check acid levels/voltage before charging.
Recommendations for charger location away from battery, avoiding placement above battery, and ensuring ventilation.
Safety steps for connecting/disconnecting DC output clips, ensuring proper contact and avoiding short circuits.
Detailed instructions for connecting charger clips to vehicle battery and chassis, covering both negative and positive ground systems.
Recommends safety goggles and gloves. Restricts charger use to lead-acid batteries; warns against non-rechargeable/frozen batteries.
Instructions for grounding the charger and proper AC plug connection to prevent electric shock and fire hazards.
Lists electrical rating, charge settings (2A/8A/15A), battery cable, and power cord details.
Describes the LCD display and the functions of Amperage, Battery Type, Charge, Recondition, and Winter Mode buttons.
Explains charger protections against overheating, reverse polarity, and overcharging for safe operation.
Steps for connecting charger, ensuring ventilation, cleaning terminals, and checking battery specifics before charging.
Guidelines for placing the charger away from the battery, avoiding acid drip, and ensuring adequate airflow.
Detailed steps for connecting charger clips to a battery installed in a vehicle, with safety warnings.
Detailed steps for connecting charger clips to a battery removed from a vehicle, emphasizing safety precautions.
Instructions on connecting charger, selecting settings (amperage, battery type), and initiating the charge cycle.
Explains float/maintenance mode, reconditioning function for weak batteries, and winter charging mode.
Guide to check for loose hardware, cracks, or damaged wiring before each use to ensure safe operation.
Instructions for cleaning the charger externally and emphasizes that only qualified technicians should service damaged cords.
Lists common error codes (Reverse Polarity, Over Heat, etc.) with their possible causes and recommended solutions.
Outlines the warranty period, coverage, exclusions, and return process for product defects.
Explains FCC regulations for digital devices and provides tips to resolve radio frequency interference.
