To Next PageTo Next Page
Need help?Do you have a question about the Viking AMK 082 and is the answer not in the manual?
Perform a visual check to ensure mulch insert and blade are in good condition before each use.
Packaging material is not a toy and poses a suffocation risk to children.
The mowing deck cannot be removed with the mulch insert installed. Always remove the mulch insert first.
Refer to the instruction manual for mowing blade maintenance procedures.
Check the mulching blade for damage and wear. Replace worn or damaged blades. Secure with Loctite 243 and tighten to 65-70 Nm.
Refer to the instruction manual for installation of the mowing deck.
The mulching key must be folded forwards before installing the mulch insert until it latches.
Install with mowing deck and discharge chute. Wear gloves. Clean deck. Set deck to lowest cutting level for ease.
Secure the mulch insert using the screw (E) and ring nut (F) in the specified rear panel bores.
The grass catcher box must be fitted due to safety devices; machine will not start or will cut out if not fitted.
Detach grass catcher box, unhook the ring nut, and carefully pull the mulch insert out of the discharge chute.
The mowing deck cannot be removed with the mulch insert installed. Always remove the mulch insert first.
Removal of the mulching blade is identical to the removal of the mowing blade.
Refer to the instruction manual for mowing blade maintenance procedures.
Grass clippings are shredded and blown back into the lawn to decompose, returning nutrients.
Mulching is recommended only for dry, short grass. Avoid wet or damp conditions to prevent clogging.
For a perfect lawn, mulch regularly. Spring: twice weekly. Summer/Autumn: once weekly.
Observe points: Use sharp blades, select correct cutting height, manage tall grass, select correct driving speed.
Always select the maximum engine speed when mulching.
Check blade wear limits by removing the mowing deck or using a lifting platform. Ensure blade thickness is at least 2.5 mm and width is at least 65 mm.
Perform a visual check to ensure mulch insert and blade are in good condition before each use.
Packaging material is not a toy and poses a suffocation risk to children.
The mowing deck cannot be removed with the mulch insert installed. Always remove the mulch insert first.
Refer to the instruction manual for mowing blade maintenance procedures.
Check the mulching blade for damage and wear. Replace worn or damaged blades. Secure with Loctite 243 and tighten to 65-70 Nm.
Refer to the instruction manual for installation of the mowing deck.
The mulching key must be folded forwards before installing the mulch insert until it latches.
Install with mowing deck and discharge chute. Wear gloves. Clean deck. Set deck to lowest cutting level for ease.
Secure the mulch insert using the screw (E) and ring nut (F) in the specified rear panel bores.
The grass catcher box must be fitted due to safety devices; machine will not start or will cut out if not fitted.
Detach grass catcher box, unhook the ring nut, and carefully pull the mulch insert out of the discharge chute.
The mowing deck cannot be removed with the mulch insert installed. Always remove the mulch insert first.
Removal of the mulching blade is identical to the removal of the mowing blade.
Refer to the instruction manual for mowing blade maintenance procedures.
Grass clippings are shredded and blown back into the lawn to decompose, returning nutrients.
Mulching is recommended only for dry, short grass. Avoid wet or damp conditions to prevent clogging.
For a perfect lawn, mulch regularly. Spring: twice weekly. Summer/Autumn: once weekly.
Observe points: Use sharp blades, select correct cutting height, manage tall grass, select correct driving speed.
Always select the maximum engine speed when mulching.
Check blade wear limits by removing the mowing deck or using a lifting platform. Ensure blade thickness is at least 2.5 mm and width is at least 65 mm.
General| Brand | Viking |
|---|---|
| Model | AMK 082 |
| Category | Lawn and Garden Equipment |
| Language | English |
