Viking GE 250 S - User Manual

Questions and Answers

J
Joanna SweeneyAug 8, 2025
What to do if shredding material is not drawn in Viking GE 250 S?
- T
  Timothy SampsonAug 8, 2025
  If the shredding material is not being drawn in, especially with the GE 260 model, the blade disc's rotational direction may be incorrect. Change the rotational direction of the blade disc.
B
beckhayleyAug 14, 2025
What to do if my Viking Lawn and Garden Equipment motor does not start?
- S
  sandybowenAug 15, 2025
  If the motor doesn't start, it could be due to several reasons. First, ensure that the feed chute is properly closed, as the safety cut-off switch might be actuated. Second, the blade disc might be blocked. In this case, check the power cable and fuse. Finally, the locking device may not be reset; in this case, reset the locking device.
S
Sarah PowersAug 20, 2025
Why Viking Chipper motor does not start?
- T
  timothymitchellAug 20, 2025
  The motor may not start because the feed chute is not properly closed, activating the safety cut-off switch. Another potential cause is a blocked blade disc. Also, the locking device might not be reset. Reset the locking device or check the power cable and fuse. Allow machine to cool down.
G
grantrichardAug 27, 2025
What to do if Viking Chipper shredding performance is reduced?
- L
  Lauren SheaAug 27, 2025
  If your Viking Chipper's shredding performance is reduced, the blades may be blunt. Reverse, re-sharpen, or replace the shredding blades.
J
Jordan BlairAug 31, 2025
Why is shredding material not drawn into my Viking Chipper?
- T
  tammy22Sep 1, 2025
  If shredding material is not being drawn into your GE 260 Viking Chipper, the blade disc may have an incorrect rotational direction. Change the rotational direction of the blade disc.